ABSTRACT
Objective@#To investigate the phenotypes and predominant skeletodental pattern in pre-adolescent patients with Pierre-Robin sequence (PRS). @*Methods@#The samples consisted of 26 Korean pre-adolescent PRS patients (11 boys and 15 girls; mean age at the investigation, 9.20 years) treated at the Department of Orthodontics, Seoul National University Dental Hospital between 1998 and 2019. Dental phenotypes, oral manifestation, cephalometric variables, and associated anomalies were investigated and statistically analyzed. @*Results@#Congenitally missing teeth (CMT) were found in 34.6% of the patients (n = 9/26, 20 teeth, 2.22 teeth per patient) with 55.5% (n = 5/9) exhibiting bilaterally symmetric missing pattern. The mandibular incisors were the most common CMT (n = 11/20). Predominant skeletodental patterns included Class II relationship (57.7%), posteriorly positioned maxilla (76.9%) and mandible (92.3%), hyper-divergent pattern (92.3%), high gonial angle (65.4%), small mandibular body length to anterior cranial base ratio (65.4%), linguoversion of the maxillary incisors (76.9%), and linguoversion of the mandibular incisors (80.8%). Incomplete cleft palate (CP) of hard palate with complete CP of soft palate (61.5%) was the most frequently observed, followed by complete CP of hard and soft palate (19.2%) and CP of soft palate (19.2%) (p < 0.05). However, CP severity did not show a significant correlation with any cephalometric variables except incisor mandibular plane angle (p < 0.05). Five craniofacial and 15 extra-craniofacial anomalies were observed (53.8% patients); this implicated the need of routine screening. @*Conclusions@#The results might provide primary data for individualized diagnosis and treatment planning for pre-adolescent PRS patients despite a single institution-based data.
ABSTRACT
Objective@#The aim of this study was to evaluate the correlation between the vertical position of maxillary first molar and vertical skeletal measurements in lateral cephalograms by using new linear measurements on the vertical axis of coordinates with calibration. @*Methods@#The vertical position of maxillary first molar (U6-SN), and the conventionally used variables (ConV) and the newly derived linear variables (NwLin) for vertical skeletal patterns were measured in the lateral cephalograms of 103 Korean adults with normal occlusions. Pearson correlation analyses and multiple linear regression analyses were performed with and without calibration using the anterior and posterior cranial base (ACB and PCB, respectively) lengths to identify variables related to U6-SN. @*Results@#The PCB-calibrated statistics showed the best power of explanation. ConV indicating skeletal hyperdivergency was significantly correlated with U6-SN.Six NwLin regarding the position of palatal plane were positively correlated with U6-SN. Each multiple linear regression analysis generated a two-variable model: sella and nasion to palatal plane. Among the three models, the PCBcalibrated model yielded highest adjusted R2 value, 0.880. @*Conclusions@#U6-SN could be determined by the vertical position of the maxilla, which could then be used to plan the amount of molar intrusion and estimate its clinical stability. Cephalometric calibration on the vertical axis of coordinates by using PCB for vertical linear measurements could strengthen the analysis itself.
ABSTRACT
Purpose@#This study aimed to find a correlation between the occlusal plane and two reference planes that are frequently used in semi-adjustable articulators. @*Materials and Methods@#Sixty-two males and fifty females with normal articulation were recruited and the lateral cephalograms of these patients were taken. The angles between the Frankfort horizontal (FH) and the occlusal planes, the angles between the gnathologic and the occlusal planes, and the angles between the FH and gnathologic planes were measured on the lateral cephalograms.Result: The mean angles between the FH and the occlusal planes was 8.29°±3.62°, with 8.88°±3.09° and 7.63°±4.10°for male and female patients, respectively. The mean angles between the gnathologic and the occlusal planes was 2.77°±3.62°, and the angle between the FH and the gnathologic planes was 5.52°±3.62°. No significant differences were found in the measured angles between the male and female patients (P>0.05). @*Conclusion@#Different guidance angles may be applied to articulators for prosthodontic restoration, depending on the reference planes that the articulators use.
ABSTRACT
Objective@#To investigate the phenotypes and predominant skeletodental pattern in pre-adolescent patients with Pierre-Robin sequence (PRS). @*Methods@#The samples consisted of 26 Korean pre-adolescent PRS patients (11 boys and 15 girls; mean age at the investigation, 9.20 years) treated at the Department of Orthodontics, Seoul National University Dental Hospital between 1998 and 2019. Dental phenotypes, oral manifestation, cephalometric variables, and associated anomalies were investigated and statistically analyzed. @*Results@#Congenitally missing teeth (CMT) were found in 34.6% of the patients (n = 9/26, 20 teeth, 2.22 teeth per patient) with 55.5% (n = 5/9) exhibiting bilaterally symmetric missing pattern. The mandibular incisors were the most common CMT (n = 11/20). Predominant skeletodental patterns included Class II relationship (57.7%), posteriorly positioned maxilla (76.9%) and mandible (92.3%), hyper-divergent pattern (92.3%), high gonial angle (65.4%), small mandibular body length to anterior cranial base ratio (65.4%), linguoversion of the maxillary incisors (76.9%), and linguoversion of the mandibular incisors (80.8%). Incomplete cleft palate (CP) of hard palate with complete CP of soft palate (61.5%) was the most frequently observed, followed by complete CP of hard and soft palate (19.2%) and CP of soft palate (19.2%) (p < 0.05). However, CP severity did not show a significant correlation with any cephalometric variables except incisor mandibular plane angle (p < 0.05). Five craniofacial and 15 extra-craniofacial anomalies were observed (53.8% patients); this implicated the need of routine screening. @*Conclusions@#The results might provide primary data for individualized diagnosis and treatment planning for pre-adolescent PRS patients despite a single institution-based data.
ABSTRACT
Objective@#The aim of this study was to evaluate the correlation between the vertical position of maxillary first molar and vertical skeletal measurements in lateral cephalograms by using new linear measurements on the vertical axis of coordinates with calibration. @*Methods@#The vertical position of maxillary first molar (U6-SN), and the conventionally used variables (ConV) and the newly derived linear variables (NwLin) for vertical skeletal patterns were measured in the lateral cephalograms of 103 Korean adults with normal occlusions. Pearson correlation analyses and multiple linear regression analyses were performed with and without calibration using the anterior and posterior cranial base (ACB and PCB, respectively) lengths to identify variables related to U6-SN. @*Results@#The PCB-calibrated statistics showed the best power of explanation. ConV indicating skeletal hyperdivergency was significantly correlated with U6-SN.Six NwLin regarding the position of palatal plane were positively correlated with U6-SN. Each multiple linear regression analysis generated a two-variable model: sella and nasion to palatal plane. Among the three models, the PCBcalibrated model yielded highest adjusted R2 value, 0.880. @*Conclusions@#U6-SN could be determined by the vertical position of the maxilla, which could then be used to plan the amount of molar intrusion and estimate its clinical stability. Cephalometric calibration on the vertical axis of coordinates by using PCB for vertical linear measurements could strengthen the analysis itself.
ABSTRACT
Objective@#To investigate the treatment modalities (Tx-Mods) for patients with unilateral hemifacial microsomia (UHFM) according to Pruzansky–Kaban types and growth stages. @*Methods@#The samples consisted of 82 Korean UHFM patients. Tx-Mods were defined as follows: Tx-Mod-1, growth observation due to mild facial asymmetry; Tx-Mod-2, unilateral functional appliance; TxMod-3, fixed orthodontic treatment; Tx-Mod-4, growth observation due to a definite need for surgical intervention; Tx-Mod-5, unilateral mandibular or bimaxillary distraction osteogenesis (DO); Tx-Mod-6, maxillary fixation using LeFort I osteotomy and mandibular DO/sagittal split ramus osteotomy; TxMod-7, orthognathic surgery; and Tx-Mod-8, costochondral grafting. The type and frequency of Tx-Mod, the number of patients who underwent surgical procedures, and the number of surgeries that each patient underwent, were investigated. Results: The degree of invasiveness and complexity of Tx-Mod increased, with an increase in treatment stage and Pruzansky–Kaban type (initial 0.05). @*Conclusions@#These findings might be used as basic guidelines for successful treatment planning and prognosis prediction in UHFM patients.
ABSTRACT
Objective@#To investigate the distribution, side involvement, phenotype, and associated anomalies of Korean patients with craniofacial clefts (CFC). @*Methods@#The samples consisted of 38 CFC patients, who were treated at Seoul National University Dental Hospital during 1998–2018. The Tessier cleft type, sex, side involvement, phenotype, and associated anomalies were investigated using nonparametric statistical analysis. @*Results@#The three most common types were #7 cleft, followed by #0 cleft and #14 cleft. There was no difference between the frequency of male and female. Patients with #0 cleft exhibited nasal deformity, bony defect, and missing teeth in the premaxilla, midline cleft lip, and eye problems. A patient with #3 cleft (unilateral type) exhibited bilateral cleft lip and alveolus. All patients with #4 cleft were the bilateral type, including a combination of #3 and #4 clefts, and had multiple missing teeth. A patient with #5 cleft (unilateral type) had a posterior openbite. In patients with #7 cleft, the unilateral type was more prevalent than the bilateral type (87.0% vs. 13.0%, p < 0.001). Sixteen patients showed hemifacial microsomia (HFM), Goldenhar syndrome, and unilateral cleft lip and palate (UCLP). There was a significant match in the side involvement of #7 cleft and HFM (87.5%, p < 0.01). Patients with #14 cleft had plagiocephaly, UCLP, or hyperterorbitism. A patient with #30 cleft exhibited tongue tie and missing tooth. @*Conclusions@#Due to the diverse associated craniofacial anomalies in patients with CFC, a multidisciplinary approach involving a well-experienced cooperative team is mandatory for these patients.
ABSTRACT
Objective@#To investigate the dental phenotypes and treatment modalities (TxMod) in Korean patients with Parry–Romberg syndrome (PRS) using longitudinal data. @*Methods@#The samples consisted of 10 PRS patients, who were treated and/or followed-up at Seoul National University Dental Hospital between 1998 and 2019. Using a novel PRS severity index based on the numbers of the atrophy-involved area and asymmetry-involved item, we classified them into mild (n = 3), moderate (n = 2), and severe (n = 5). Dental phenotypes, including congenitally missing tooth (Con-Missing-Tooth), microdontia, tooth with short root (Short-Root), tooth with dilacerated root, and delayed eruption/impacted tooth, were investigated along with Tx-Mod. @*Results@#The side of occurrence of all dental phenotypes showed 100% concordance with the side of PRS involvement. The most two common dental phenotypes were Con-MissingTooth and Short-Root (n = 29 and n = 17 in six patients). The sums of the average number of Con-Missing-Tooth and Short-Root increased from mild PRS to moderate PRS and severe PRS cases (1.0, 6.0, and 6.2). In terms of TxMod, growth observation due to mild atrophy, fixed orthodontic treatment, and grafting were used for mild PRS cases. Tx-Mod for moderate PRS cases involved growth observation for surgery due to an early age at the initial visit. For severe PRS cases, diverse Tx-Mod combinations including unilateral functional appliance, fixed orthodontic treatment, growth observation, grafting, and orthognathic surgery were used. @*Conclusions@#The novel PRS severity index may be useful to provide primary data for individualized diagnosis and treatment planning for PRS patients.
ABSTRACT
OBJECTIVE@#To investigate the distribution and phenotypes of hemifacial microsomia (HFM) and its association with other anomalies.@*METHODS@#This study included 249 Korean patients with HFM, whose charts, photographs, radiographs, and/or computed tomography scans acquired during 1998–2018 were available from Seoul National University Hospital and Dental Hospital. Prevalence according to sex, side involvement, degree of mandibular deformity, compensatory growth of the mandibular body, and Angle's classification, and its association with other anomalies were statistically analyzed.@*RESULTS@#Prevalence was not different between male and female patients (55.0% vs. 45.0%, p > 0.05). Unilateral HFM (UHFM) was more prevalent than bilateral HFM (BHFM) (86.3% vs. 13.7%, p 0.05). Among patients with BHFM, prevalence of different Pruzansky–Kaban types on the right and left sides was greater than that of the same type on both sides (67.6% vs. 32.4%, p < 0.05). Despite hypoplasia of the condyle/ramus complex, compensatory growth of the mandibular body on the ipsilateral side occurred in 35 patients (14.1%). Class I and II molar relationships were more prevalent than Class III molar relationships (93.2% vs. 6.8%, p < 0.001). Forty-eight patients (19.3%) had other anomalies, with 50.0% and 14.4% in the BHFM and UHFM groups (p < 0.001).@*CONCLUSIONS@#Patients with HFM require individualized diagnosis and treatment planning because of diverse phenotypes and associations with other anomalies.
ABSTRACT
OBJECTIVE@#The purpose of this study was to compare the static (SFF) and kinetic frictional forces (KFF) of a computer-aided design and computer-aided manufacturing lingual bracket (CAD/CAM-LB) with those of conventional LB (Con-LB) and Con-LB with narrow bracket width (Con-LB-NBW) under 3 tooth displacement conditions.@*METHODS@#The samples were divided into 9 groups according to combinations of 3 LB types (CAD/CAM-LB [Incognito], Con-LB [7th Generation, 7G], and Con-LB-NBW [STb]) with 3 displacement conditions (no displacement [control], maxillary right lateral incisor with 1-mm palatal displacement [MXLI-PD], and maxillary right canine with 1-mm gingival displacement [MXC-GD]; n = 6/group). While drawing a 0.016-inch copper or super-elastic nickel-titanium archwire with 0.5 mm/min for 5 minutes in a chamber maintained at 36.5℃, SFF and KFF were measured. The Kruskal-Wallis method with Bonferroni correction was performed.@*RESULTS@#The Incognito group demonstrated the highest SFF, followed by the 7G and STb groups ([STb-control, STb-MXLI-PD, Stb-MXC-GD] < [7G-MXC-GD, 7G-MXLI-PD, 7G-control] < [Incognito-MXLI-PD, Incognito-control, Incognito-MXC-GD]; p < 0.001). However, there were no significant differences in SFF among the 3 displacement conditions within each bracket group. Within each displacement condition, the Incognito group demonstrated the highest KFF, followed by the 7G and STb groups ([STb-control, STb-MXLI-PD] < Stb-MXC-GD < 7G-MXLI-PD < [7G-control, 7G-MXC-GD] < [7G-MXC-GD, Incognito-MXLI-PD, Incognito-control] < [Incognito-control, Incognito-MXC-GD]; p < 0.001). MXC-GD exhibited higher KFFs than MXLI-PD in the same bracket group.@*CONCLUSIONS@#The slot design and ligation method of the CAD/CAM-LB system should be modified to reduce SFF and KFF during the leveling/alignment stage.
ABSTRACT
No abstract available.
ABSTRACT
Maxillomandibular fractures usually require intermaxillary fixation as a means to immobilize and stabilize the fracture and to re-establish proper occlusion. Arch bars or intermaxillary fixation screws cannot be used for edentulous patients or for patients who have poor dental health. Here, we present a case of repeated intermaxillary fixation failure in a patient weak alveolar rigidity secondary to multiple dental implants. Because single-point fixation screws were not strong enough to maintain proper occlusion, we have used Y-shaped plates to provide more rigid anchoring points for the intermaxillary wires. We suggest that this method should be considered for patients in whom conventional fixation methods are inappropriate or have failed.
Subject(s)
Humans , Dental Implants , Jaw Fixation Techniques , Mandible , Mandibular ReconstructionABSTRACT
PURPOSE: The aim of this study was to investigate the combined effects of physical and chemical surface factors on in vivo bone responses by comparing chemically modified hydrophilic sandblasted, large-grit, acid-etched (modSLA) and anodically oxidized hydrophobic implant surfaces. METHODS: Five modSLA implants and five anodized implants were inserted into the tibiae of five New Zealand white rabbits (one implant for each tibia). The characteristics of each surface were determined using field emission scanning electron microscopy, energy dispersive spectroscopy, and confocal laser scanning microscopy before the installation. The experimental animals were sacrificed after 1 week of healing and histologic slides were prepared from the implant-tibial bone blocks removed from the animals. Histomorphometric analyses were performed on the light microscopic images, and bone-to-implant contact (BIC) and bone area (BA) ratios were measured. Nonparametric comparison tests were applied to find any significant differences (P0.05). CONCLUSIONS: Within the limitations of this study, the hydrophilicity of the modSLA surface may have a stronger effect on in vivo bone healing than optimal surface roughness and surface chemistry of the anodized surface.
Subject(s)
Animals , Rabbits , Animal Experimentation , Chemistry , Dental Implants , Hydrophobic and Hydrophilic Interactions , Microscopy, Confocal , Microscopy, Electron, Scanning , Osseointegration , Spectrum Analysis , Tibia , TitaniumABSTRACT
PURPOSE: The goal of this study was to investigate the histomorphometric characteristics of the healing process of microcracks in the cortical bone after the installation of mini-implants (MIs). METHODS: Self-drilling MIs were inserted into the tibial diaphysis of twelve adult male New Zealand rabbits. Four MIs per rabbit were placed randomly. The animals were divided into four groups according to the length of the healing period: group A was sacrificed immediately, group B was sacrificed after one week, group C was sacrificed after two weeks, and group D was sacrificed after four weeks. Cortical bone thickness was measured using micro-computed tomography, and histomorphometric analyses of the cumulative length of the microcracks (CLCr) and the total number of microcracks (NCr) were performed using hematoxylin and eosin staining. RESULTS: The microcracks were radially and concentrically aligned in the peri-MI bone. The CLCr decreased significantly one week after the surgery, mainly due to healing of the concentrically aligned microcracks. The CLCr showed another significant decrease from two weeks after the surgery to four weeks after the surgery, mainly reflecting healing of the radially aligned microcracks. A statistically significant decrease in the NCr occurred as the microcracks healed from zero weeks to two weeks. However, no significant difference in the NCr was found between groups C and D. CONCLUSIONS: In order to improve the primary stability of MIs, delayed loading and a healing period of a certain length are recommended to ensure the optimal healing of microcracks and bone remodeling.
Subject(s)
Adult , Animals , Humans , Male , Rabbits , Bone Remodeling , Diaphyses , Eosine Yellowish-(YS) , Hematoxylin , Orthodontic Anchorage ProceduresABSTRACT
OBJECTIVE: This study aimed to compare the effects of conventional and orthodontic mini-implant (OMI) anchorage on tooth movement and arch-dimension changes in the maxillary dentition in Class II division 1 (CII div.1) patients. METHODS: CII div.1 patients treated with extraction of the maxillary first and mandibular second premolars and sliding mechanics were allotted to conventional anchorage group (CA, n = 12) or OMI anchorage group (OA, n = 12). Pre- and post-treatment three-dimensional virtual maxillary models were superimposed using the best-fit method. Linear, angular, and arch-dimension variables were measured with software program. Mann-Whitney U-test and Wilcoxon signed-rank test were performed for statistical analysis. RESULTS: Compared to the CA group, the OMI group showed more backward movement of the maxillary central and lateral incisors and canine (MXCI, MXLI, MXC, respectively; 1.6 mm, p < 0.001; 0.9 mm, p < 0.05; 1.2 mm, p < 0.001); more intrusion of the MXCI and MXC (1.3 mm, 0.5 mm, all p < 0.01); less forward movement of the maxillary second premolar, first, and second molars (MXP2, MXM1, MXM2, respectively; all 1.0 mm, all p < 0.05); less contraction of the MXP2 and MXM1 (0.7 mm, p < 0.05; 0.9 mm, p < 0.001); less mesial-in rotation of the MXM1 and MXM2 (2.6degrees, 2.5degrees, all p < 0.05); and less decrease of the inter-MXP2, MXM1, and MXM2 widths (1.8 mm, 1.5 mm, 2.0 mm, all p < 0.05). CONCLUSIONS: In treatment of CII div.1 malocclusion, OA provided better anchorage and less arch-dimension change in the maxillary posterior teeth than CA during en-masse retraction of the maxillary anterior teeth.